Test Clamp

Test Clamp
Test Clamp
Test Clamp

Brass Cable Glands manufacture and export different types of Cable Glands Accessories including Brass Test Clamps. The multi-purpose Brass Test Clamps can produce circular to circular or circular to tape connection in both through and tee configuration. Test Clamps are highly demanded for electrical grounding applications. Depending upon the different needs and requirements of Test clamps, we produce different types of test clamps with different sizes and shapes as per the customer’s needs and requirements.

Following are the specification of Test Clamp :
  • Used to form a disconnecting joint between the down conductor and earthing system.
  • For connecting flat tape to solid circular conductor.
  • Used for testing the earthing system.
  • Designed to connect lightning protection to earthing system & facilitate periodic testing.
  • For securing clamp to the building surface and the lid is fixed by means of four screws.
  • For forming end to end joints.
  • Allows the conductor to be disconnected from the earthing point so that the earth resistance may be measured.
Ingress Protection Rating:
  • IP 66 and IP 68
  • Copper, Aluminium, Brass, Gunmetal
  • Electro Nickel Plated, Chrome Plated, Natural Brass Plating, Zinc and Electro Tin Plated.
  • Used to provide an effective low resistance connection between overlapping tapes.
  • Simple to install.
  • The clamp connection is easily made to allow for periodic testing.
  • Enables cross and tees through and right angle joints to be formed.
  • The conductors are secured by the top and bottom plates being clamped together.
We can manufacture and export Test Clamp as per specifications (custom drawing and samples) for more information please Contact Us